Page 1 | Page 2

SUPERFIX High-temperature plastics. Physical properties. Mechanical | Thermal | Electrical | Miscellaneous
			Thermal properties
			Melting point (DIN 53 736)	Glass transition temperature (DIN 53 736)	Heat distortion temperature after ISO-R 75, method A (DIN 53461)	Heat distortion temperature after ISO-R 75, method B (DIN 53461)	Maximum service Temperature short term	Thermal conductivity (23°C)	Specific heat (23°C)	Co-efficient of linear termal expansion (23°)
DIN Abbreviation	Additives And/or colour	Service tempe-rature °C long term	TM °C	Tg °C	HDT/A °C	HDT/B °C	°C	l W/(K·m)	c J/(g·K)	a 10^-51/k
PPE	Grey	85	-	98/150	130	138	110	0,22	1,2	6
PPE GF 30	30% glass fibre, beige	85	-	98/150	135	143	110		1,34	3
ABS	Grey	85	-	-	82-104	96-108	100	0,17	1,2	8
PP	Also in Black**	100	165	-18	65	105	130	0,22	1,7	11
PE-HD	Also in Black**	90	130	-95	42-49	70-85	120	0,35-0,43	1,7-2	13-15
POM Copolymer	Also in Black**	100	165	-60	110	160	140	0,31	1,5	10
POM GF 30 Copolymer	30% glass fibre	100	165	-60	153		140		1,21	3
POM Copolymer	With lubricant blue	100	-	-60	88		140		1,5	13
POM Copolymer	Conductive Carbon black, black	100	165	-60	89		140			13
POM Copolymer	PTFE	100	165	-60	98		140		1,47	11
POM Homopolymer		100	175	-38	124	170	150	0,31	1,5	10
POM Homopolymer	PTFE, Brown	100	175	-38	118	168	150			8,1
POM GF 20 Homopolymer	20% glass fibre	100	175	-38	158	174	150			3,6-8,1
POM Homopolymer	With lubricant	100	175	-38			150	0,37	1,47	10
PA 6 G	Also in blue	100	220	5* 40	95	195	180	0,24	1,7	5-6
PA 6 G	MoS2, Black	100	210	5* 40			170			9,5
PA 6-3-T	transparent	100	-	145	130	140	145	0,23	1,45	5-6
PA 6		100	223	5* 40	75	190	160	0,23	1,7	7
PA 66	Heat stabilizer, brown	115	255	5* 50	100	200	180	0,23	1,7	10
PA 66	With lubricant	90	255	5* 50	85	185	120	0,23	1,7	7-10
PA 66 GF 30	30% glass fibre, black	110	255	5* 50	250	250	200	0,27	1,5	2-3
PA 66 CF 20	20% carbon fibre, black	110	255	5* 50	245	250	200	0,43	1,8	2,5
PBT GF 30	30% glass fibre	120	225	22	210	225	190		1,5	2-3
PET		110	255	69	95	170	180	0,24	1,1	7-8
PC	Transparent	120	-	148	135	140	140	0,19	1,2	6-7
PC GF 30	30% glass fibre	120	-	148	142	147	140	0,26	1,08	3
PMP	Transparent	120	245	20	51	85	180	0,17	2,18	~12
PA 11		80	190	43	55	150	150	0,23	2,1	10
PA 46		130	295	85	160		220	0,3	2,1	7,5
Remark: For polyamides the values strongly depend on the humidity contents. *humid, after storage in standard atmosphere 23°C 50 RH (DIN 50 014) until saturation. **For materials where “also in black” is detailed under “additives and/or colour” the electrical values do not apply to the black type. Additionally, the black variants are resistant to weathering.
+ = Resistant (+) = Limited resistance - = Not resistant (depending on concentration, time and temperature)